The Husqvarna K3600 MK II Ring saw features a 10" cutting depth with a 14" concrete ring blade!

Cutting ring
The cutting ring on the Husqvarna K 3600 is fixed and supported by four roller bearings at
the periphery of the blade. Two of these are guide runners that run in the slot on the side of
the ring, pressing it forward and into a drive wheel, which gives better control and longer
service life.
Cutting depth
With the peripheral drive, the cutting depth is not limited by a blade spindle, and you can
cut far deeper than with a traditional cutter with a center-driven blade. The cutting depth of
10" (260 mm) is sufficient to cut through a normal wall from one side.
Light cutter with high power
Hydraulics is an excellent way to transfer high power without the actual cutter becoming
Good working conditions
Running a hydraulic ring saw means you avoid fumes and high noise levels, so they are
ideal for both indoor and outdoor jobs.
Diamond chains
for ICS hydraulic
and Gas

Chains for Partner

Please call for
help with diamond
chain selection
Diamond Ringsaw
Husqvarna K3600 MK II
Hydraulic Concrete Cutting Ring saw

The Husqvarna K3600 MK II hydraulic ringsaw is a saw with unique performance
and features.  The rim drive system allows an impressive 10" cutting depth in
concrete. Its power-to-weight ratio and hydraulic drive make the Husqvarna K3600  
a highly efficient and maneuverable hydraulic concrete ring saw.  The Husqvarna
K3600 ring saw is well suited for a wide range of applications.  The combination of
large cutting depth and high capacity with minimal set-up time make the K3600 MK
II one of the most productive tools in the business.

  • 10" cutting depth with 14" blade, due to the unique rim drive system
  • Stable support rollers for easier adjustment and blade change
  • Sealed drive and roller system
  • Adjustable front handle with integrated, convenient water adjustment
  • Large lower spray guard and integrated support foot
  • Low weight and ergonomic design
  • Supplied with grease gun to simplify greasing of the guide rollers
2500 psi max pressure, 10 gal/min, 17.8 lbs